virtual template interface are used to combine multiple interfaces in to one virtual interface called virtual template, assume that you have you hav two 2 Mbps link & you wanted to combine in to 1 virtual link as 4 Mbps, virtual interface will do the needful, go through the configuration below, which is working configuration, which i hav already posted today.
A virtual template interface is used to provide the configuration for dynamically created Virtual-Access interfaces. It is created by users and can be saved in nonvolatile RAM (NVRAM).
Once the virtual template interface is created, it can be configured in the same way as a serial interface.
To create a virtual template interface that can be configured and applied dynamically in creating virtual access interfaces, use the interface virtual-template command in global configuration mode.
Virtual template interfaces can be created and applied by various applications such as Virtual Profiles, virtual private dialup networks (VPDN), PPP over ATM, PPP over Frame Relay, protocol translation, and Multichassis Multilink PPP (MMP).
A Virtual Template Interface Service feature provides a generic service that can be used to apply predefined interface configurations (virtual template interfaces) in creating and freeing virtual access interfaces dynamically, as needed.
A virtual template interface is a logical entity?a configuration for a serial-interface but not tied to a physical interface?that can be applied dynamically as needed. Virtual access interfaces are virtual interfaces that are created, configured dynamically (for example, by applying [cloning] a virtual template interface), used, and then freed when no longer needed.
The Multilink interface was introduced in Cisco IOS Software Release 12.0(3)T.
A multilink group interface is a collection of interfaces bundled together in the multilink PPP configuration, accordingly with a multilink group interface, you can bundle interfaces into logical multilink groups.
Multilink interface supports only PPP encapsulation.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...