Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

What's the basic command to configure a serial interface

Pardone my ignorance, but I'm new to cisco products.

I'm trying to configure a router. What's the command to add an ip address to interface serial0?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: What's the basic command to configure a serial interface

go to the interface config mode and type the ip address

interface serial 0

ip address

have a look at the interface config guide for other parameters that may be needed on the serial interface

http://www.cisco.com/en/US/docs/ios/12_2/interface/configuration/guide/icfserin.html#wp1012526

Narayan

2 REPLIES

Re: What's the basic command to configure a serial interface

go to the interface config mode and type the ip address

interface serial 0

ip address

have a look at the interface config guide for other parameters that may be needed on the serial interface

http://www.cisco.com/en/US/docs/ios/12_2/interface/configuration/guide/icfserin.html#wp1012526

Narayan

New Member

Re: What's the basic command to configure a serial interface

Thanks that works!

128
Views
0
Helpful
2
Replies
CreatePlease to create content