Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

What's the fastest way to upgrade from Sup 4 & 5 to Sup 6 LE on a 4507R switch?

Hi everyone,

Is it possible to upgrade a supervisor 4 or 5 to a sup 6 on a Cisco 4507R, in a redundant supervisor environment? My goal is to ensure minimal or no down-time, and to also have the config synchronize between the old and the new sup, so that when the old one is taken out, the config will still be present on the new supervisor engine.

Thanks!

Mo

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

What's the fastest way to upgrade from Sup 4 & 5 to Sup 6 LE on

Redundancy requires both supervisors to be same thus you can't integrate your newly Sup6 into a chassis running SupIV or SupV.

If you have a spare 4500 chassis with similar line cards, you can load the appropiate code into the Sup6 as well as applying the configuration from your production environment.

There are something features that have changed from SupIV-V to Sup6, namely QoS - so please be aware.

In short, you need to schedule downtime for this migration and make sure to backup your configs.

Regards,

Edison

3 REPLIES
Hall of Fame Super Bronze

What's the fastest way to upgrade from Sup 4 & 5 to Sup 6 LE on

Redundancy requires both supervisors to be same thus you can't integrate your newly Sup6 into a chassis running SupIV or SupV.

If you have a spare 4500 chassis with similar line cards, you can load the appropiate code into the Sup6 as well as applying the configuration from your production environment.

There are something features that have changed from SupIV-V to Sup6, namely QoS - so please be aware.

In short, you need to schedule downtime for this migration and make sure to backup your configs.

Regards,

Edison

New Member

Re: What's the fastest way to upgrade from Sup 4 & 5 to Sup 6 LE

Edison,

Thanks for the quick response! This is great information... Does that mean that if I were to insert a Sup6 module in a chassis with a SupIV already in it, it will just throw some error and that even the config won't sync between the two? Just wanna be sure; thanks!

Hall of Fame Super Bronze

Re: What's the fastest way to upgrade from Sup 4 & 5 to Sup 6 LE

Correct, the configuration won't synchronize.

318
Views
5
Helpful
3
Replies
CreatePlease to create content