Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

when do people normally use IBGP

Hi all

due to the restrictions with ibgp, ie not advertising a route from another ibgp neighbour and the requirement for a full mesh network, when do people use ibgp?

and why would a full mesh network resolve the issue? if they never advertise routes learned from another ibgp neighbour.

cheers              

Everyone's tags (4)
1 REPLY
Hall of Fame Super Silver

Re: when do people normally use IBGP

Hello Carl,

the iBGP full mesh issue is normally solved using BGP Route Reflectors servers and for very big service providers by using also BGP confederations.

so iBGP can be used without scalability issues usually in service provider environments  and also in big enterprise environment after introduction of MPLS services like L3 VPN

BGP RR technical details:

A BGP RR is allowed to reflect iBGP advertisements between its own clients and to non-clients.

To perform reflection in a safe way the BGP RR adds two BGP attributes to the advertisement it reflects:

Originator ID =  BGP router-id of the client that has originated the advertisement

Cluster-list =  it contains the cluster-id of the local RR that by default is equal to RR device BGP router-id.

It is updated at each reflection and provides the reflection history/ internal path. So it may be formed by multiple items with IPv4 format.

BGP configuration has to be changed only on RR side using command

neighbor x.x.x.x route-reflector-client

Only a full mesh between RR devices is needed instead of having a full mesh of all devices. This greatly reduces the number of required iBGP sessions as a device can receive advertisements originated by a router with which it has no direct iBGP session via RRs.

Without BGP RRs or BGP confederations iBGP would be a problem as you noted as the number of required BGP sessions is N *(N-1)/2 where N is the number of routers. ( with N=100 it would mean 4950 BGP sessions that cannot be supported by a single router)

Hope to help

Giuseppe

225
Views
0
Helpful
1
Replies