CAUSE: The Cisco firewall has a configuration entry like the following (it may have additional parameters specified after <inspection-list-name> in addition to esmtp):
ip inspect name <inspection-list-name> esmtp
This problem occurs because of incompatibilities or restrictions caused by the Cisco firewall configuration. It is more likely to occur if you are sending an email to multiple recipients or using a distribution list in Exchange.
FIX: Disable this entry in the Cisco firewall configuration by inserting the word “no” at the beginning of the line as shown, so that it should now read something like
Re: why cisco firewall course exchange mail error?
The SMTP inspection is used to protect the SMTP server from any attacks. It will ensure that only certain commands are issued to the server and the commands issued are in proper syntax. If the client server is a legacy system, some of the commands used by the client server may not be compatible with the ESMTP inspection causing break in the communication. Here is a detailed explanation of the ESMTP inspection functionality.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...