Why my 857 adv security don't have class-map and policy map command ?

SIRIPHAN SONMANEE · ‎02-02-2012

now i wanna use traffic shaping on this

but when i use command class-map it doesn't have please advise me.

my show ver.

Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T17, R

ELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Tue 24-Jan-12 14:40 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE

PlasticWorldRouter uptime is 1 hour, 54 minutes

System returned to ROM by reload at 19:02:11 bangkok Thu Feb 2 2012

System restarted at 19:02:52 bangkok Thu Feb 2 2012

System image file is "flash:c850-advsecurityk9-mz.124-15.T17.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 857 (MPC8272) processor (revision 0x400) with 59392K/6144K bytes of memory

.

Processor board ID FGL1532223Q

MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10

4 FastEthernet interfaces

1 ATM interface

128K bytes of non-volatile configuration memory.

20480K bytes of processor board System flash (Intel Strataflash)

Configuration register is 0x2102

Router(config)#c?

call cdp clock cns

config-register configuration connect control-plane

crypto

Router(config)#p?

parameter-map parser password policy-manager

ppp privilege process process-max-time

pseudowire-class

i must use any command before use it.

Thotsaphon Lueangwattanaphong · ‎02-02-2012

Hi Siriphan

Cisco 857 doesn't support full QoS implementation. What you got is as follows:

Weighted Fair Queuing (WFQ)

Policy-based routing (PBR)

Per-VC queuing

Per-VC traffic shaping

If you want to do MQC on the router. You need to consider Cisco 870 serires or higher models.

Seems you're TH people(as me). Just guess from your name.

HTH,

Thotsaphon

SIRIPHAN SONMANEE · ‎02-04-2012

Many thank for your answer

yes i am thai people

and which way to use Qos or traffic shaping on 857

i want to dedicate bandwidth around 256 K for 192.168.0.210 for sip protocol

Thotsaphon Lueangwattanaphong · ‎02-04-2012

Hello,

First off , you want to dedicate BW for a specific protocol. You can do CBWFQ. But it doesn't support on C857. You might consider to use Cisco 870 series to meet that requirement.

HTH,

Thotsaphon