why the console screen display like this"Warning: filesystem is not clean"and "%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash contained errors which were auto-corrected."while ASR1002 power on??
i configured a new ASR1002 router yesterday,i powerd on the ASR1002 to check the device include some SPA moduler,but i found my console screen display like this""Warning: filesystem is not clean"and "%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash contained errors which were auto-corrected."while ASR1002 power on.
anybody know how to resolve these warning and erroers ?is it format the flash can resolve them?!!
Re: why the console screen display like this"Warning: filesystem
There is nothing to worry about. During a cold unexpected reboot (power off), some files may get corrupted and are repaired during the next reboot. If you use a graceful reboot (via the reload command) instead, those messages should disappear.
Missing or illegal ip address for variable DEFAULT_GATEWAY Using midplane macaddr Missing or illegal ip address for variable IP_ADDRESS Missing or illegal ip address for variable IP_SUBNET_MASK Package header rev 0 structure detected Calculating SHA-1 hash...done validate_package: SHA-1 hash: calculated 7b84920e:3701229d:e8468b35:dd834c12:2c3bc588 expected 7b84920e:3701229d:e8468b35:dd834c12:2c3bc588 Image validated
Kernel load: Uncompressing image... dst: 00000000 lim: 00400000 start: 00808674 size: 00178E6 9...done. Now booting the IOS XE kernel
Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 12.2(33)XNF2, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Wed 07-Jul-10 01:19 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0. The software code licensed under GPL Version 2.0 is free software that comes with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such GPL code under the terms of GPL Version 2.0. For more details, see the documentation or "License Notice" file accompanying the IOS-XE software, or the applicable URL provided on the flyer accompanying the IOS-XE software.
% NONE-MODE: Redundancy Mode Change - peer will be reloaded when config mode exi ts This product contains cryptographic features and is subject to United This product contains cryptographic features and is subject to United use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
why the console screen display like this"Warning: filesystem is
The errors are not serious provided it say 'auto-corrected'.
The documentation says issue a 'reload' command before powering down to ensure all the log files are closed correctly (it's Linux based), but it isn't clear from the documentation at what point it is ready to be powered off. It appears that when it displays 'initialising hardware' that is the right time, but you could miss that message.
If you issue the command as 'reload pause' and wait for the 'Enter [continue]...' prompt it halts at the right point and means you don't need to have one eye on the terminal while being ready to dive for the power switch!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...