12-16-2005 01:22 PM - edited 03-03-2019 11:15 AM
I'm running a c3640 at home with 2 connections. 1 connection cable(charter communications, dynamic ip and outside nat interface) and Bell dsl(static). I'm currently routing certain traffic over the adsl line to the office and the non-office traffic over cable (for the additional speed).
I purchased a wic-1adsl to handle the dsl termination. All of the example configs I have looked into show ATM interface. I have upgraded several different revisions of IOS and my router only gives me Virtual-Access1 interface and no ATM interfaces.
The IOS version I am currently using is:
c3640-telco-mz.123-13b.bin
Has anyone out there run into a problem like this? I can configure the Virtual-template for a ppp connection but I need to set a pppoe connection. Any help is always appreciated.
Thanks
05-11-2006 03:30 PM
hello globalnettech
thank you im purchase new module NM-1FE2W
now you can explain me because i received this Error Message
%LINK-4-NOMAC : A random default MAC address of [enet] has
been chosen. Ensure that this address is unique, or specify MAC
addresses for commands (such as 'novell routing') that allow the
use of this address as a default.
how i make to setup it correct ?
whats the command i use to configure this MAC address ?
please help me urgent
im gratefull
thank you
beasystem
05/11/06 8.31 pm
05-04-2006 01:24 PM
how I upgrade the System Bootstrap, Version 11.1(20)AA2, EARLY. 3640 DRAM Config
Travis-Denni
hello
how are you..
can you help me
how i make to upgrade my verison 11.1.(19)AA
can you send pass to pass setup
to this version to new this version 11.1.(20(AA2
System Bootstrap, Version 11.1(20)AA2, EARLY ... 3620/3640 DRAM Config
Addresses. ...
have you this file image this System Bootstrap, Version 11.1(20)AA2.
EARLY 3640
can send to my email fribook@gmail.com
im gratefull
thank you
beasystem
nice day
05/04/06 6:20 PM
05-04-2006 01:47 PM
how I upgrade the System Bootstrap, Version 11.1(20)AA2, EARLY. 3640 DRAM Config
Travis-Denni
hello
how are you..
can you help me
how i make to upgrade my verison 11.1.(19)AA
can you send pass to pass setup
to this version to new this version 11.1.(20(AA2
System Bootstrap, Version 11.1(20)AA2, EARLY ... 3620/3640 DRAM Config
Addresses. ...
have you this file image this System Bootstrap, Version 11.1(20)AA2.
EARLY 3640
can send to my email fribook@gmail.com
im gratefull
thank you
beasystem
nice day
05/04/06 6:20 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide