Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WIC-1DSU-T1 and 2800 series router

Hello everyone. I have a very simple question regarding a 2800 router and WIC-1DSU-T1 cards. The 2800 has HWIC and NM slots, I was working under the assumtion that an HWIC slot would accomadate a WIC card, but the router will not discover these devices and assign them a port as many other routers that I have worked with do. I have tried various IOS with the same results. Any suggestions? Thanks in advance!

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: WIC-1DSU-T1 and 2800 series router

It's possible you might need to define the WIC card added via the controller command. Don't have access to a 2800 at the moment for an example, but if this is the situation, good chance someone else will provide more info.

3 REPLIES
Super Bronze

Re: WIC-1DSU-T1 and 2800 series router

It's possible you might need to define the WIC card added via the controller command. Don't have access to a 2800 at the moment for an example, but if this is the situation, good chance someone else will provide more info.

Community Member

Re: WIC-1DSU-T1 and 2800 series router

Hi, the product guides for the 2800 list a V2 of WIC-1DSU-T1 (see http://www.cisco.com/en/US/products/ps5854/products_relevant_interfaces_and_modules.html#serialwan).

If your WIC is the older version, it may be that it's not compatible.

Community Member

Re: WIC-1DSU-T1 and 2800 series router

True enough... Follow up question, would the T1/E1 ports on http://www.cisco.com/en/US/products/hw/modules/ps5365/products_data_sheet09186a0080191d41.html (NM-HDV2-2T1/2E1) perform the same function as a pair of WIC-1DSU-T1 would? Does the NM card have the DSU functionality onboard like the WIC does?

699
Views
0
Helpful
3
Replies
CreatePlease to create content