Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

WIC 1DSU T1 V2 error with IOS ver 12.4.23

I have a 3845 running 12.4.13a which I want to upgrade to 12.4.24.

After upgrade one of the interface that is configured for frame relay doesn't work anymore.

The interface configuration is:

interface Serial0/0/0

bandwidth 128

no ip address

encapsulation frame-relay

no ip mroute-cache

logging event subif-link-status

logging event dlci-status-change

no fair-queue

service-module t1 timeslots 1-4

service-module t1 remote-alarm-enable

frame-relay traffic-shaping

After the router reloads in 12.4.24 I get this errors in the log

Apr 22 13:39:33.525: %SERVICE_MODULE-4-WICNOTREADY: Unit Serial0/0/0 not ready for next command -Traceback= 0x61202820 0x60549704 0x605497B4 0x6054A458 0x605410F0 0x60547914 0x60548C58 0x60545D30 0x61243728 0x6125FA10 0x625E8D20 0x625EC350 0x6223EBC0 0x6223EBA4

Apr 22 13:39:33.525: wait_ft1_wic_mailbox failed 4

In fact is the "service-module t1 timeslots" commands that can not be executed and the router throws that error.

I tested this behaviour on two 3845s and the result is the same.

Is this a bug or is an workaround for it?

Thanks,

Florin

3 REPLIES
Hall of Fame Super Bronze

Re: WIC 1DSU T1 V2 error with IOS ver 12.4.23

Florin,

I suggest you open a TAC case or revert back to a previous IOS version.

What triggered the IOS upgrade?

__

Edison.

New Member

Re: WIC 1DSU T1 V2 error with IOS ver 12.4.23

Thanks for your post I will open a TAC case.

Florin

New Member

WIC 1DSU T1 V2 error with IOS ver 12.4.23

Came across this discussion looking to resolve the same issue. This is an old thread but figured I would post the bug id for future users.

CSCte08720

Regards,

2373
Views
0
Helpful
3
Replies
CreatePlease to create content