Good morning Richard
Thank you for looking at this
My Router is an C2621 and I cannot find any thing that suggests its a C2600XM.
When I try to show devices I cannot see the card.
I attached a print out of my IOS.
show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(3), RELEASE
SOFTWARE (fc2)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 19-Aug-03 16:32 by dchih
Image text-base: 0x80008098, data-base: 0x819AF6CC
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s3-mz.123-3.bin"
cisco 2621 (MPC860) processor (revision 0x600) with 56320K/9216K bytes
of memory.
Processor board ID JAD054906Z3 (651052972)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
GATEWAY(config)#int fa0/0
GATEWAY(config-if)#exit
GATEWAY(config)#int s0/0
^
% Invalid input detected at '^' marker.
GATEWAY(config)#int s0/0/0
^
% Invalid input detected at '^' marker.
GATEWAY(config)#int serial0/0
^
% Invalid input detected at '^' marker.
