Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WIC 1ENETdoesnot recognized on 1720

I am adding a new WIC 1ENET into my CISCO 1720, but it seems like doesnot recognized .. could any body please help?

Ro_internet#sh fla
System flash directory:
File  Length    Name/status
  1   3589896  c1700-y-mz.122-7b.bin
[3589960 bytes used,  13187256 available, 16777216 total]
16384K bytes of processor board System  flash (Read/Write)
Ro_internet#sh diag
Slot 0:
        C1720 1FE  Mainboard Port adapter, 2 ports
        Port adapter is analyzed
         Port adapter insertion time unknown
        EEPROM contents at hardware  discovery:
        Hardware Revision        : 6.1
        PCB Serial  Number        : JAD061804X4
        Part Number              :  73-3201-06
        Board Revision           : A0
        Fab  Version              : 04
        EEPROM format version 4
        EEPROM  contents (hex):
          0x00: 04 FF 40 00 B2 41 06 01 C1 8B 4A 41 44 30 36  31
          0x10: 38 30 34 58 34 82 49 0C 81 06 42 41 30 02 04  FF
          0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  FF
        WIC Slot 0:
        Unknown
         Hardware revision 64.0  Board revision G0
        Serial number      0960561920    Part number    130-18710-165
        Test history       0x03          RMA number     66-65-48
        Connector type     PCI
        EEPROM format version 4
        EEPROM contents  (hex):
        0x20:   04 FF 40 00 39 41 03 00 82 49 16 A5 03 42 41  30
        0x30:   80 00 00 00 00 02 02 C1 8B 56 4D 53 30 36 32  38
        WIC Slot 1:
        Serial 1T
         Hardware revision 1.0   Board revision L0
        Serial number      0028428306    Part number    800-01514-01
        Test history       0x00          RMA number     00-00-00
        Connector type    WAN  Module
        EEPROM format version 1
        EEPROM contents  (hex):
        0x20:   01 02 01 00 01 B1 C8 12 50 05 EA 01 00 00 00  00
        0x30:   A8 00 00 00 02 05 21 01 FF FF FF FF FF FF FF  FF
8 REPLIES
Hall of Fame Super Gold

Re: WIC 1T doesnot recognized on 1720

Have you tried using the WIC-1T somewhere else?  Can you post the bootup process?  Make sure the WIC-1T is properly inserted and s_c_r_w_e_d down.

New Member

Re: WIC 1ENET doesnot recognized on 1720

I dont have any other router ;<( ..

I am suspecting the IOS? .. does it support WIC 1T?

please advise

Hall of Fame Super Gold

Re: WIC 1T doesnot recognized on 1720

New Member

Re: WIC 1ENET doesnot recognized on 1720

does the IOS also support WIC 1 ENET? .. pls take look for WIC Slot 0 ..

sorry, I meant WIC 1 ENET ..

Hall of Fame Super Gold

Re: WIC 1T doesnot recognized on 1720

New Member

Re: WIC 1ENET doesnot recognized on 1720

Hi .. I am unable to open the link ..

does my IOS support WIC 1ENET?

Ro_internet#sh fla
System flash directory:
File  Length    Name/status
  1   3589896  c1700-y-mz.122-7b.bin
[3589960 bytes used,  13187256 available, 16777216 total]
16384K bytes of processor board System  flash (Read/Write)
Hall of Fame Super Gold

Re: WIC 1ENET doesnot recognized on 1720

It should work and the link is fine.

New Member

Re: WIC 1ENETdoesnot recognized on 1720

do sure your WIC-1NET card working ?

chang another slot

331
Views
0
Helpful
8
Replies