WIC 1T Card

[resfat2001]

Hello,

Is the card WIC 1T on router 3640 support a rate of 2Mbps and if it is compatible with a V35 interface?

the configuration bellow is valid?

interface Serial0/0

ip address 10.0.70.109 255.255.255.252

encapsulation ppp

bandwith 2048

thanks

[abhishek_nandavat]

Hi,

The configuration looks fine. No problems at all with it. The card supports a maximum of 2.048 Mbps Sync Max speed.

Refer the following URLs for more -->

http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800b0859.shtml#features

http://www.cisco.com/en/US/products/hw/routers/ps274/products_data_sheet09186a0080091b8b.html

Hope this helps...

Regards,

AbhisheK

Please rate all helpful posts!!!

[resfat2001]

thanks for your help,

now if i want to have a rate of 4Mbps, what type of card i must have on my router and witch interface i use??

[resfat2001]

help please

[ahmednaas]

HWIC-4T @ 8 Mbps / Port but you need a router that supports it (not the 3640):

http://www.cisco.com/en/US/products/ps5949/products_data_sheet0900aecd80274416.html