Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WIC-2T issue with Tellabs LL modem

Hi

i have a 2811 (Advance IP services IOS) with 4 Nos of WIC-2T connected to Tellabb 8110 Leased line modem at HO and Cisco 1841 (Advance IP services IOS) with WIC-1T connected to Tellabs 8110 modem.

In the above scenario, there is no communication between HO router and Branch router.

But i insert WIC-1T card on HO router (2811) the communication is happening.

Is there any specific configuration needs to be done in Tellabs 8110 modem to connect Smart serial cable?

I also suspect the issue with WIC-2T cards (on 2811). but i have 4 Nos of WIC-2T, all are giving the same issue.

Can anyone suggest me with the solution?

Thanks in advance....

- Arjun

548
Views
0
Helpful
0
Replies