I have installed a new cisco877 router in my company, after configuring it all the machines with xp are working OK, but the problem is those with windows7 they can't brouse some sites like msn,yahoo,amazon,hotmail but some other sites are working like google i don't know what is the same thing that is similar in this sites.
realy i can't imagine this but this is what hapenned.
this is my configuration can any one advice me.
! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! enable secret 5 $1$ADbY$fkNhsaOnX79e3aHqDzFmR/ ! no aaa new-model ! ! dot11 syslog ip cef ! ! no ip dhcp use vrf connected ip dhcp excluded-address 192.168.1.51 192.168.1.254 ! ip dhcp pool techno network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 188.8.131.52 184.108.40.206 220.127.116.11 18.104.22.168 ! ! ip name-server 22.214.171.124 ip name-server 126.96.36.199 ip name-server 188.8.131.52 ip name-server 184.108.40.206 ! multilink bundle-name authenticated ! ! username cisco privilege 15 secret 5 $1$JmAj$iB/h2yPyj8EeUHqivSsBr. ! ! archive log config hidekeys ! ! ! ! ! interface ATM0 no ip address no atm ilmi-keepalive bundle -enable ! dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/35 pppoe-client dial-pool-number 1 ! ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface Dialer1 mtu 1492 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 ppp authentication chap pap callin ppp chap hostname $$$$$$$$$$$$
ppp chap password 0 $$$$$$$$$ ppp pap sent-username $$$$$$$$$$$$ password $$$$$$$$$$ ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 Dialer1 ! ! ip http server no ip http secure-server ip dns server ip nat inside source route-map nonat interface Dialer1 overload ! access-list 101 permit ip 192.168.1.0 0.0.0.255 any ! ! ! route-map nonat permit 20 match ip address 101 ! ! control-plane ! ! line con 0 password cisco123 login no modem enable line aux 0 line vty 0 4 password cisco123 login ! scheduler max-task-time 5000 end
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...