Wireless 1130AG Access Point Limited or No Connectivity
We use laptop trolleys with 2 mounted Access Points on each trolley, they are connected to a switch (on the trolley). When the trolleys are moved between rooms they can be plugged into designated network points/power. We have restricted the AP's to band A only and disabled bands G & B on each of the laptops.
we have also added MAC address filtering to force half of the laptops to default to AP1 and half to default to AP2 for load balancing. The laptops are authenticated via a Radius server certificate.
we are getting limited or no connectivity on random laptops, and also it seems that even though the default filter is to block all mac addresses apart from those in the list, we are still getting laptops that should be denied access appearing as connected on the AP that they shouldn't be able to access.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...