Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

wireless Lan controller not access by GUI interface

Hi All,

         i have one new cisco WLC 2106.i am not able access it by GUI interface.please help me how can i access it.It is true i am totally new for cisco wlc.

8 REPLIES
Hall of Fame Super Gold

Re: wireless Lan controller not access by GUI interface

If you are new you can start by reading this ...

Cisco Wireless LAN Controller Configuration Guide, Release 6.0
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/Controller60CG.html

New Member

Re: wireless Lan controller not access by GUI interface

Hi Leo,

thank you for your quick reply but i had done each and every thing and

after that i am not able to access it.already i had configure like that

which is mention below.

(Cisco Controller) >show interface detailed management

Interface Name................................... management

MAC Address...................................... 00:1b:d5:cf:c5:40

IP Address....................................... 10.0.0.254

IP Netmask....................................... 255.0.0.0

IP Gateway....................................... 10.0.0.1

External NAT IP State............................ Disabled

External NAT IP Address.......................... 0.0.0.0

VLAN............................................. untagged

Quarantine-vlan.................................. 0

Physical Port.................................... 2

Primary DHCP Server.............................. 10.0.0.100

Secondary DHCP Server............................ Unconfigured

DHCP Option 82................................... Disabled

ACL.............................................. Unconfigured

AP Manager....................................... No

Guest Interface.................................. No

(Cisco Controller) >

please help me.

On Fri, Feb 12, 2010 at 2:24 PM, leolaohoo <

Hall of Fame Super Gold

Re: wireless Lan controller not access by GUI interface

Can you ping the Management IP Address?
Is HTTP enabled (by default HTTP is disabled but HTTPS is enabled)?
Have you tried HTTPS?

New Member

Re: wireless Lan controller not access by GUI interface

Hi Leo,

i am able to ping this management ip 10.0.0.254 by console but not

my system and i tried both http:
ip and https:

System(Laptop) ip is 10.0.0.222 gateway 10.0.0.254 and also tried none.

On Fri, Feb 12, 2010 at 2:35 PM, leolaohoo <

Hall of Fame Super Gold

Re: wireless Lan controller not access by GUI interface

sudhutorjonno wrote:

VLAN............................................. untagged

Right, well I believe the link between the WLC and the switch should be a dot1q Trunk.

New Member

Re: wireless Lan controller not access by GUI interface

hi,

my setup just like that,

WLC IS CONNECT MY SYSTEM BY A rj45 CABLE.

please tell network scenario so that i can access it by GUI interface.

On Fri, Feb 12, 2010 at 2:46 PM, leolaohoo <

Hall of Fame Super Gold

Re: wireless Lan controller not access by GUI interface

Which port of the 2106 is your laptop connected to?
What is the subnet mask of your laptop?
Disable firewall on the client.

New Member

Re: wireless Lan controller not access by GUI interface

hi,

port 2 is connected on my system.

subnet is 255.0.0.0

system firewall is disable

waiting for your response

On Fri, Feb 12, 2010 at 2:59 PM, leolaohoo <

267
Views
0
Helpful
8
Replies