We have quite big wireless infrastructure that provides Internet for more then 100 customers. Please see the attachment for the map.
- 1 Cisco 3600 router with 2 ports one F0/0 for the wireless backend and F0/1 for the fiberlink to outside world.
- For all the connections we use public ip address, currently we use 192.168.0.0/23 (192.168 is not real) for the f0/0 all the access points and switch use range of 192.168.0.1-192.168.0.50 the rest is for connection are access points.
- The AP we use is Ubiquity Networks as well as the clients.
- All the AP that are on the picture are in the bridged mode.
- All the client AP's that are connection to those AP are in router mode.
- We give business customers another public subnet /30 and residential 192.168.88.0/24 and route it all the way to F0/0 192.168.0.1/23 as default gateway for the clients AP but for CPE they have to use second of /30 address to be able to access Internet. Example 10.0.1.0/30 (assume it's public) 10.0.1.1 is LAN interface for customers AP and 10.0.1.2 is for their router, so the default gateway is 10.0.1.1.
10.0.1.252/30 for individual 2 public address (1 for AP and one for customer router)
Basicaly we have a big broadcast domain on all our AP of /23 networks, that brings another problem customers can talk to each other, since they being router all the way back to Cisco Router which will say "ah, it's has to go back to the same interface it came from", but since switches and bridges don't know how to route that particular subnet it's gonna be dropped.
Im planing to redesign the network in efficient way, if possible without using another public subnet for the end customers since we already have /23 there, there should be the way only use one public subnet for all. Of course bridging all to /23 instead of routing will eliminate the need for anther customer subnet but /23 broadcast domain is not really efficient. Im thinking to use inter-vlan routing (router on the stick) dividing /23 on the bunch of /30 address, but not really sure how to implement it on such a big scale with all those wireless bridges. I would love to hear some recommendation how to go about this, even with possible configs for Cisco router. Thanks a lot!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...