WRVS4400N Router

[keithwalz]

My ISP requires that I be able to hard set the WAN port to 100Mbs Full Duplex.  Is this possible with the WRVS4400N?

I see an option to set the switch ports but not the WAN port.

Thanks for any help

[Giuseppe Larosa]

Hello Keith,

thanks to Conor that posted it in another thread there is an emulation of the GUI

http://ui.linksys.com/files/WRVS4400N/1.00.12/switch_vlan.htm

let's see under port settings it is possible see

http://ui.linksys.com/files/WRVS4400N/1.00.12/switch_port.htm

you just need to select 100 full in the Mode column

Hope to help

Giuseppe

[keithwalz]

Thanks, but that is the settings for the switch ports, I need to be able to set the WAN port to 100mbps Full Duplex

[Giuseppe Larosa]

Hello Keith,

you are absolutely right.

it looks like there is no way to hardcode speed and duplex on wan port on the GUI

Hope  to help

Giuseppe