Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

WRVS4400N Router

My ISP requires that I be able to hard set the WAN port to 100Mbs Full Duplex.  Is this possible with the WRVS4400N?

I see an option to set the switch ports but not the WAN port.

Thanks for any help

3 REPLIES
Hall of Fame Super Silver

Re: WRVS4400N Router

Hello Keith,

thanks to Conor that posted it in another thread there is an emulation of the GUI

http://ui.linksys.com/files/WRVS4400N/1.00.12/switch_vlan.htm

let's see under port settings it is possible see

http://ui.linksys.com/files/WRVS4400N/1.00.12/switch_port.htm

you just need to select 100 full in the Mode column

Hope to help

Giuseppe

Community Member

Re: WRVS4400N Router

Thanks, but that is the settings for the switch ports, I need to be able to set the WAN port to 100mbps Full Duplex

Hall of Fame Super Silver

Re: WRVS4400N Router

Hello Keith,

you are absolutely right.

it looks like there is no way to hardcode speed and duplex on wan port on the GUI

Hope  to help

Giuseppe

777
Views
0
Helpful
3
Replies
CreatePlease to create content