Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WS-X6148A-GE-TX Throughput and amount of ASIC

Hi,

I would like to know what is the maximun throughput of WS-X6148-GE and the real mapping between port to ASIC.

At Cisco on http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Module_Installation/Mod_Install_Guide/02ethern.html#wp1042813

appear that this LC is oversubscripted 8:1 but this LC is a classic that has a 16Gbps of capacity to share bus.

On the other side in the cisco documentation appear that

Port groups

WS-X6148-GE-TX—2

WS-X6148A-GE-TX—6

But on the real 7600 the following command show only 1 ASIC for 48 ports:

#sh inter g1/1 capabilities

GigabitEthernet1/1

  Model:                 WS-X6148A-GE-TX

  Type:                  10/100/1000BaseT

  Speed:                 10,100,1000,auto

  Duplex:                half,full

  Trunk encap. type:     802.1Q,ISL

  Trunk mode:            on,off,desirable,nonegotiate

  Channel:               yes

  Broadcast suppression: none

  Flowcontrol:           rx-(off,on,desired),tx-(off,on,desired)

  Membership:            static

  Fast Start:            yes

  QOS scheduling:        rx-(1q2t), tx-(1p3q8t)

  CoS rewrite:           yes

  ToS rewrite:           yes

  Inline power:          no

  SPAN:                  source/destination

  UDLD                   yes

  Link Debounce:         yes

  Link Debounce Time:    no

  Ports on ASIC:         1-48

  Port-Security:         yes

Regards,


  • WAN Routing and Switching
Everyone's tags (1)
1 REPLY
Hall of Fame Super Gold

WS-X6148A-GE-TX Throughput and amount of ASIC

If I remembered correctly the 6148 is controlled by one ASIC. 

1473
Views
0
Helpful
1
Replies
This widget could not be displayed.