Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

WS-X6708-10GE Temperature Threshold

Hello,

There is a WS-X6708-10GE installed on 6509 with below status.

6509#sh module 9
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  9    8  CEF720 8 port 10GE with DFC            WS-X6708-10GE      SAL1201BZ7J

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  9  0018.b967.2338 to 0018.b967.233f   1.3   12.2(18r)S1  12.2(33)SXH8 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
  9  Distributed Forwarding Card WS-F6700-DFC3CXL   SAL1106GGV7  1.0    Ok

Mod  Online Diag Status
---- -------------------
  9  Pass

 

The temperature of ASICs on this module seems to be high but I can't find the threshold value. Is this temperature OK or NOT?

6509#sh  environment temperature module 9
  module 9 outlet temperature: 61C
  module 9 inlet temperature: 47C
  module 9 aux-1 temperature: 59C
  module 9 aux-2 temperature: 50C
  module 9 asic-1 temperature: 88C
  module 9 asic-2 temperature: 81C

 

Below command shows some threshold except ASICs threshold.

6509#sh environment alarm thresholds module 9
module 9 power-output-fail: OK
  threshold #1 for module 9 power-output-fail:
    (sensor value != 0 ) is system minor alarm
module 9 insufficient cooling: N/A
  threshold #1 for module 9 insufficient cooling:
    (sensor value != 0 ) is system major alarm
module 9 outlet temperature: 61C
  threshold #1 for module 9 outlet temperature:
    (sensor value >= 75C) is system minor alarm
  threshold #2 for module 9 outlet temperature:
    (sensor value >= 85C) is system major alarm
module 9 inlet temperature: 47C
  threshold #1 for module 9 inlet temperature:
    (sensor value >= 55C) is system minor alarm
  threshold #2 for module 9 inlet temperature:
    (sensor value >= 65C) is system major alarm

 

 

Everyone's tags (3)
178
Views
0
Helpful
0
Replies
CreatePlease login to create content