Hi,
I am trying to configure a router to convert a XOT SVC session to a PVC session.
Host app - XOT SVC - Router - X.25 serial PVC.
There is a small section at http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080094a44.shtml
descibing this, but I am unable to get this to work. The example is to include -
x25 pvc 5 svc 101600 packetsize 128 128 windowsize 2 2
under the PVC serial interface. I would then expect a call to 101600 to be routed to the PVC serial interface, but this appears to be ignored. The doc suggests this is switch PVC to SVC, maybe that works. But does this scenario also switch a SVC to a PVC?
I would appreciate any advice.
Thanks