Thank you :-) ... I am trying to figure out why getting a dhcp address over an mpls circuit works fine for a straight T1 circuit but not for an adsl mpls circuit. On the T1 circuit all i had to do was put the ip helper-address on the lan interface. This is not working on the cpe that connects to the adsl mpls circuit. The x.25 reading mentions pvcs and the ip helper command not working in that instance. so I thought i would ask. What is weird is that I see the dhcp discovery request hit the dhcp server and it is pingable from the LAN of the site not getting dhcp if the computer used has a static ip address. I have seen a few posts for this issue from other but no resolution .
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...