Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

x25 alias command - upgrading 12.0.x to 12.3.x

Hi,

I'm experiencing a problem with x25 alias command after I moved from IOS 12.0 to 12.3.

I know that from now we need to use the commend on the interface not in global mode as before:

old style:

x25 route 123456(.*) alias Serial0/1

x25 route 123456(.*) alias Serial0/2

new style:

interface serial 0/1

x25 alias 123456.*

interface serial 0/2

x25 alias 123456.*

My problem is that after upgrade to 12.3 I cannot setup a call. It is looking that alias commend does not work (i have few sources talking to the destinaton so I need to have alias on each serials interfaces).

Do you have any similar issue?

Thanks,

1 REPLY
Hall of Fame Super Gold

Re: x25 alias command - upgrading 12.0.x to 12.3.x

Very few people still uses X.25 nowadays.

Your best choice is to engage Cisco TAC, and hope.

136
Views
0
Helpful
1
Replies