Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

x25 over TCP/IP

I am trying to configure X25 over TCP.

Serial interface conf:

interface Serial0/0

no ip address

encapsulation x25 dce

no ip mroute-cache

x25 address *******

In the routing table i have the following entry:

x25 route .* xot <IP Adress>

The remote hosts Ip address is reachable, but when I'm trying sh x25 vc nothing comes up.

I am new to x25, can anyone tell me what is wrong with my conf

Thank you in advance

8 REPLIES

Re: x25 over TCP/IP

New Member

Re: x25 over TCP/IP

I checked it before. The serial interface is up, and the protocol is up, but sh x25 vc still shows me nothing. In fact, it showed me x25 details only first time I typed in the command.

Re: x25 over TCP/IP

Have you performed the trouble shooting/debugging at the bottom of the config example?

New Member

Re: x25 over TCP/IP

Yes, I have done it, debugging and sh x25 vc returns me nothing

Re: x25 over TCP/IP

No output at all?? I would proably try a re-load!

New Member

Re: x25 over TCP/IP

The issue is solved, thank you

Re: x25 over TCP/IP

np - not sure I hepled!

New Member

Re: x25 over TCP/IP

I forgot to set up clockrate on the interface ))

562
Views
0
Helpful
8
Replies