Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

X25 traffic from a XOT session routed to another XOT session

Hi Guys,

We try to configured a x25 routing from one XOT session to another XOT session.

--

We do not succeed in making it working.

--

- The X25 routing from a X25 interface to a XOT session is workign fine

- the X25 routing from a XOT session to a X25 interface is working fine

- but a x25 routing from a XOT session to another XOT session is not working.

--

the usual X25 message is:

--

Cause 13, Diag 64 (Not obtainable/Call or Clear problem)

--

LGER14#

*Oct 21 20:41:51.126: %SYS-5-CONFIG_I: Configured from console by consolesh x25 route

# Match Substitute Route to match/use

1 dest .* xot 10.1.1.13

13/13

2 dest 15 Sub-dest 25 xot 10.1.1.15

0/0

3 dest 25 xot 10.1.1.15

0/0

4 dest 16 Sub-dest 26 xot 10.1.1.15

0/0

LGER14#

*Oct 21 20:42:00.397: [10.1.1.13,18892/10.1.1.14,1998]: XOT I P/Inactive Call (17) 8 lci 1

*Oct 21 20:42:00.397: From (2): 12 To (2): 16

*Oct 21 20:42:00.397: Facilities: (6)

*Oct 21 20:42:00.397: Packet sizes: 128 128

*Oct 21 20:42:00.397: Window sizes: 2 2

*Oct 21 20:42:00.397: Call User Data (4): 0x01000000 (pad)

*Oct 21 20:42:00.401: [10.1.1.13,18892/10.1.1.14,1998]: XOT O P3 Clear (5) 8 lci 1

*Oct 21 20:42:00.401: Cause 13, Diag 64 (Not obtainable/Call or Clear problem)

*Oct 21 20:42:00.417: [10.1.1.13,18892/10.1.1.14,1998]: XOT I P6 Clear Confirm (3) 8 lci 1

LGER14#sh x25 route

# Match Substitute Route to match/use

1 dest .* xot 10.1.1.13

14/14

2 dest 15 Sub-dest 25 xot 10.1.1.15

0/0

3 dest 25 xot 10.1.1.15

0/0

4 dest 16 Sub-dest 26 xot 10.1.1.15

1/1

LGER14#

--

Could anyone confirm if this could work or if this is not supported by the IOS?

Thanks. regards/Ludovic.

1 REPLY
Hall of Fame Super Gold

Re: X25 traffic from a XOT session routed to another XOT session

I think you need to go across a serial connection for XOT to XOT. Or build IP connectivity between the endpoints and skip intermediate router altogether.

150
Views
5
Helpful
1
Replies