Hi Guys,
We try to configured a x25 routing from one XOT session to another XOT session.
--
We do not succeed in making it working.
--
- The X25 routing from a X25 interface to a XOT session is workign fine
- the X25 routing from a XOT session to a X25 interface is working fine
- but a x25 routing from a XOT session to another XOT session is not working.
--
the usual X25 message is:
--
Cause 13, Diag 64 (Not obtainable/Call or Clear problem)
--
LGER14#
*Oct 21 20:41:51.126: %SYS-5-CONFIG_I: Configured from console by consolesh x25 route
# Match Substitute Route to match/use
1 dest .* xot 10.1.1.13
13/13
2 dest 15 Sub-dest 25 xot 10.1.1.15
0/0
3 dest 25 xot 10.1.1.15
0/0
4 dest 16 Sub-dest 26 xot 10.1.1.15
0/0
LGER14#
*Oct 21 20:42:00.397: [10.1.1.13,18892/10.1.1.14,1998]: XOT I P/Inactive Call (17) 8 lci 1
*Oct 21 20:42:00.397: From (2): 12 To (2): 16
*Oct 21 20:42:00.397: Facilities: (6)
*Oct 21 20:42:00.397: Packet sizes: 128 128
*Oct 21 20:42:00.397: Window sizes: 2 2
*Oct 21 20:42:00.397: Call User Data (4): 0x01000000 (pad)
*Oct 21 20:42:00.401: [10.1.1.13,18892/10.1.1.14,1998]: XOT O P3 Clear (5) 8 lci 1
*Oct 21 20:42:00.401: Cause 13, Diag 64 (Not obtainable/Call or Clear problem)
*Oct 21 20:42:00.417: [10.1.1.13,18892/10.1.1.14,1998]: XOT I P6 Clear Confirm (3) 8 lci 1
LGER14#sh x25 route
# Match Substitute Route to match/use
1 dest .* xot 10.1.1.13
14/14
2 dest 15 Sub-dest 25 xot 10.1.1.15
0/0
3 dest 25 xot 10.1.1.15
0/0
4 dest 16 Sub-dest 26 xot 10.1.1.15
1/1
LGER14#
--
Could anyone confirm if this could work or if this is not supported by the IOS?
Thanks. regards/Ludovic.
