Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
New Member

Bottleneck recovery problem.

                   We have had two serious incidents that have followed this pattern. An upstream link or device becomes saturated or unable to pass much traffic. The problem is cleared. The Ironport continues to have difficulty passing traffic with multi second response times. A reboot immediately clears the issue (we have 2 S360's, 2 wccp services with dynamic routing). Are there some tuning parameters we can use to prevent this? Why would only one of a load balanced set behave this way. Configurations are matched. Which logs would have the best chance of giving me a clue? Thanks for anything. jc

Everyone's tags (2)
1 REPLY
Cisco Employee

Bottleneck recovery problem.

Hi John,

If you have not already opened a case with the Content Security Team I would request that you do so. This particular issue is far to complex to solve on the forums.

Sincerely,

Erik Kaiser

WSA Forums Moderator

Sincerely, Erik Kaiser WSA CSE WSA Cisco Forums Moderator
329
Views
0
Helpful
1
Replies
CreatePlease login to create content