Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CLI commands

Hi

Can anyone please let me know how to configure w3c log from the command line of iron port s series and how to troubleshoot wccp from the command line.

Thanks in advance.

Sumit

  • Web Security
1 REPLY
Silver

Re: CLI commands

The main troubleshooting on CLI that you can use will be to do grep, then select which log you want to tail.

See this article for example http://tinyurl.com/6ekeec .

It will really depend on what is the problem with the wccp, the way how you will do troubleshooting.

I suggest going through kb article, and search for wccp, and they will likely give you information you will fnd helpful.

Otherwise, please give further information on your wccp problem, and maybe I can direct you further.

I hope this helps you.

Regards,

Eric

197
Views
5
Helpful
1
Replies
This widget could not be displayed.