How to configure Cisco Webex Connect IM Client with IronPort Transparent HTTP/HTTPS Proxy?
Some of our users use Cisco Webex Connect, which looks like AOL IM rebranded. We can make it work for a short period of time by setting the Connection Settings as follows, but it will stop working and require us to resave the proxy settings to get it to work again.
[Checked] Connect using proxy
Username:(Blank as we don't require proxy auth)
Password: (Blank as we don't require proxy auth)
If I try it via HTTPS, it fails completely as I suspect it is not compatible with the Ironport HTTPS Proxy mode.
Re: How to configure Cisco Webex Connect IM Client with IronPort
Thanks, Ken. I do have the Webex Application Scanning Bypass setting enabled already. I agree it is unable to work via HTTPS due to the proprietary protocol the client is using. It does seem to work sometimes, but isn't reliable. I will research the logs, as you suggested.
PS. Here is are the screenshots of the application.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...