How to make work WSA with IP Spoofing and Cisco ACE
We have a solution with a group of WSAs being load balance by an ACE. These WSAs have IP Spoofing configured and the ACE has the mac-sitcky configured also. But the configurantion does not work. When we configure the WSAs without IP Spoofing the configuration works fine. But we need IP Spoofing.
Someone had some kind of solution working?
Other question, the WSAs will respond a ARP request for the ip address of the client the it spoofed when the ACE receives the response for the WEB page request to the Internet and needs to returt it to WSA?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...