Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Ironport WSA 160 - LEDs

Hello everybody,

Where can I find a guide about the Ironport WSA 160 LEDs?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Ironport WSA 160 - LEDs

Physically, it’s a Dell box.

The UID is “unit identifier”, you hit the button on the front, or back and it goes to flashing so you can find the box from the other side of the rack…

If its orange, you have a hardware issue…. Failed drive, bad or unplugged power supply, overtemp, memory errors, failed fan… etc.

I’m not sure how much visibility TAC has to that level, but they should be able to pull ESM logs so they can tell what’s up and get the part or box replaced…

Ken

4 REPLIES
Community Member

Ironport WSA 160 - LEDs

Hello,

Which lights are you wondering about?  I know of no documentation that describes the lights.

I can give you a few descriptions on the lights that you want to know about.

Christian Rahl

Customer Support Engineer                      

Cisco IronPort - Web Security Appliances

Cisco Technical Assistance Center RTP

United States Ironport: 1-877-641-IRON (4766)

Ironport WSA 160 - LEDs

Hello Christian,

The UID light is blinking amber. Do you know what that means?

Regards.

Re: Ironport WSA 160 - LEDs

Physically, it’s a Dell box.

The UID is “unit identifier”, you hit the button on the front, or back and it goes to flashing so you can find the box from the other side of the rack…

If its orange, you have a hardware issue…. Failed drive, bad or unplugged power supply, overtemp, memory errors, failed fan… etc.

I’m not sure how much visibility TAC has to that level, but they should be able to pull ESM logs so they can tell what’s up and get the part or box replaced…

Ken

Re: Ironport WSA 160 - LEDs

Thank you Ken.

I will open a TAC.

If anyone has more information feel free to share it.

810
Views
0
Helpful
4
Replies
CreatePlease to create content