IronPort WSA management through Security Management Appliance
I have two identically configured (policies) IronPort WSA S670 appliances running 7.5.0-833 and both added in SMA M670 management appliance running 7.9.1-102. Appliance A has McAfee license expired. Newly installed appliance B has Mcafee running for 28 more days. "Sophos" is enabled on both and working good. Config Master 7.5 was built based on the config from appliance A.
Now, when i want to push the Config Master to both the associated WSA, it fails on appliance B as "McAfee" is disabled in Config Master but enabled on it. The setting "Security Services Display" in M670 was changed to enable "McAfee" but now appliance A fails giving a mis-match error on publishing.
How to workaround this ? Can McAfee license/feature key on appliance B be expired / disabled now without waiting 28 days to let it expire.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...