I have a Customer that has about 10 Iron Port 370 Web Security appliances. They want to have a M670 on the West Coast be the Primary Central Manager with a second M670 on the East coast acting in a secondary manager role. I am struggling to locate docs on the Cisco site showing how to set-up the roles between the M670s. Can Anyone Assist?
In AsyncOS Version 6 and later, redundancy was introduced to allow for message tracking and reporting data to be replicated across two M series appliances. If you configure redundancy("secondaryconfig"), ensure that only one IronPort M-Series Security Management appliance has redundancy enabled along with the respective C-Series appliances.
The following Knowledge Base article covers this type of configuration.
Article #976: How can I configure the M-series appliance for redundancy?
Centralized reporting feature for WSA will only work with one SMA (M-series), however you can add one SMA to two SMAs for centralized configuration. Just need to be careful to track which SMA is used to push/publish the configuration to the WSA.
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in HA
DocumentationCode download linksGoalRequirementLimitationsSupported ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and UCS-E Blades:Step by Step ConfigurationCo...
I am currently unable to specify "crypto keyring" command when configuring VPN connection on my cisco 2901 router.
The following licenses have been activated on my router :