I have the following configuration in my ASA based on guidelines from the above source to allow only certain sites in my home and block all requests to http and https sites. However,requests to HTTP sites are being blocked but not to HTTPS. Only one host in the network can access all sites
access-list WEBFILTER extended deny tcp host 192.168.254.115 any eq www
access-list WEBFILTER extended deny tcp host 192.168.254.115 any eq https
access-list WEBFILTER extended permit tcp any any eq www
access-list WEBFILTER extended permit tcp any any eq https
regex allowex1 “website1\.com”
regex allowex2 “website2\.com”
class-map type inspect http match-all allow-url-class
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...