There are no replies from the iron port S160 only i can see the echo in the logs, when i keep only the default route pointing to my internal (Core ) pings starts working, otherwise with two routes one for internal and default route to the ASA it doesnt work.
It is a very big stupidity by the Asyn OS , i opened a TAC case and he just add a subnet mask to my internal network and it start working.
Before the routes were 10.0.0.0 point towards core then the TAC engineer he just put a 10.0.0.0/8 and the it started ping,
This is very bad from Async OS when I submit by 10.0.0.0 without a mask atleast it should prompt with the error of subnet mask but it didnt. No where in the document it is written that we have to specify the subnet mask.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...