Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WCCP not working

Hi, 

I have issued these commands in my ASA 5520 to activate WCCP to redirect web traffic from a PC with IP 192.168.120.6 to a McAfee Web Gateway with IP 10.250.2.33:

 

access-list wccp-servers extended permit ip host 10.250.2.33 any

access-list wccp-traffic extended permit ip host 192.168.120.6 any

wccp 51 redirect-list wccp-traffic group-list wccp-servers password aspirina

wccp interface INSIDE_IF_FWSM 51 redirect in

 

We are seeing traffic in the WCCP statistics in ASA:

 

Global WCCP information:
    Router information:
        Router Identifier:                   19X.5X.12X.9X
        Protocol Version:                    2.0

    Service Identifier: 51
        Number of Cache Engines:             1
        Number of routers:                   1
        Total Packets Redirected:            906
        Redirect access-list:                wccp-traffic
        Total Connections Denied Redirect:   0
        Total Packets Unassigned:            10
        Group access-list:                   wccp-servers
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total Bypassed Packets Received:     0

 

However, the PC can't access the internet. Moreover, in the MWG we don't see GRE traffic.

 

Thanks in advance.

 

 

 

Everyone's tags (3)
2 REPLIES
Cisco Employee

Though this is in the wrong

Though this is in the wrong forum, maybe I can help.  Can you do 'show wccp 51 detail' ?  Did you already do a packet capture on your proxy?  What are you seeing there?
 

Silver

Try  "debug wccp events" and

Try  "debug wccp events" and "debug wccp packets" on ASA to check whether both of them exchanging "Here i am" and "I see you " packets

210
Views
0
Helpful
2
Replies