WCCP problems then the htmlpage redirect to other site
You will need to get a packet capture from the WSA and client pc when testing the URL or URLs which are failing.
In order to obtain a simultaneous packet capture from the WSA & PC you will need to log into the GUI ->Support and Help -> Packet Capture -> Edit Settings -> Select the radial button No Filter.Please send me a packet capture from the WSA unfiltered. Please name it WSA.pcap. Also name the client packet capture in the same format adding client in the name of the capture. Provide me with the IP address of the WSA and the client PC your testing from. You will need to install wireshark on the PC or laptop you are testing from. It is a good idea to start the wireshark program from the PC first. Also you will need to provide the URLs you are testing with.
Upload these to files to:
Erik Kaiser WSA CSE WSA Cisco Forums Moderator
WSA Cisco Forums Moderator
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...