Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

a password recovery on vWAAS

Hello,

Is some a method for the password recovery for vWAAS? When the customer forget the admin password, is possible to recover it? Or has to the customer reinstall vWAAS again?

Thanks

Roman

  • Wide Area Application Services (WAAS)
Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

a password recovery on vWAAS

Hi Roman,

Please refer to the below config guide for recovering a lost admin password. No need for reinstall:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/maint.html#wp1105354

Hope this helps.

Regards

Kiran

5 REPLIES
Cisco Employee

a password recovery on vWAAS

Hi Roman,

Please refer to the below config guide for recovering a lost admin password. No need for reinstall:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/maint.html#wp1105354

Hope this helps.

Regards

Kiran

New Member

a password recovery on vWAAS

Hi Kiran,

so it is same like for the normal WAE, isn't it?

Roman

Cisco Employee

a password recovery on vWAAS

Yes thats correct.

Once the vWAAS is deployed it is like any other WAE.

Regards

Kiran

New Member

Hello  Is there any WAAS

Hello 

 

Is there any WAAS simulator you know?

 

I found the link worked great

I found the link worked great.  I did want to point something out that was not clear to me at first. Rebooting a vWAAS on an ISR (virtual-service) is done from the router config.  (Cant rightly pull a plug or flip a switch) 

I ssh'ed into the router then consoled into the virtual service

router# virtual-service connect name ISR-WAAS console

Then ssh's into the router again to 'no activate / activate' the service.

router(config)# virtual-service ISR-WAAS

router(config-virt-serv)#no activate

Once the virt service was down I was kicked out of the connection ( but had the CLI cached for quick use to get back in.

Then followed the procedure in the link above.

794
Views
0
Helpful
5
Replies
This widget could not be displayed.