I have a wae that continues to be recognized by the CM, even though the device is inactive and has been completely removed from the network.
The device was uninstalled and removed from the CM per the Help instructions, but the device is still listed in the CM. In the Assign Devices page it's status is inactive and not modifiable.
I also get the following error on the Modifying Location page after trying to delete the device: "The Location is still being referenced by other objects and canot be removed". The Parent Location selection box has None. The Name and Comments box both have the same device name listed. There is an attachement provided.
A year ago another device was removed without any issue. Any possible suggestions?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...