Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

– Enable high availability and redundancy for Cisco WAAS

How this is available

– Enable high availability and redundancy for Cisco WAAS appliances in data centers.

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: – Enable high availability and redundancy for Cisco WAAS

Hi,

You can serially cluster two WAE devices with the Cisco WAE Inline  Network Adapter installed to provide higher availability in the data  center if a device fails. If the current optimizing device fails, the  inline group shuts down, or the device becomes the overloaded, the  second WAE device in the cluster provides the optimization services.  Deploying WAE devices in a serial inline cluster for scaling or load  balancing is not supported.

More deatils here: Clustering Inline WAEs

Hope this helps.

Regards.

PS: Please mark this as Answered, if this answers your question.

1 REPLY
Cisco Employee

Re: – Enable high availability and redundancy for Cisco WAAS

Hi,

You can serially cluster two WAE devices with the Cisco WAE Inline  Network Adapter installed to provide higher availability in the data  center if a device fails. If the current optimizing device fails, the  inline group shuts down, or the device becomes the overloaded, the  second WAE device in the cluster provides the optimization services.  Deploying WAE devices in a serial inline cluster for scaling or load  balancing is not supported.

More deatils here: Clustering Inline WAEs

Hope this helps.

Regards.

PS: Please mark this as Answered, if this answers your question.

1439
Views
0
Helpful
1
Replies
CreatePlease to create content