Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Enable HTTP metadatacache caching

On our current configuration we do not have this enabled.  We are running version 4.2.3c build 1.   Are we cuurent enough to enable this?  I was reading that you need 4.3 for this to work? Should we be up to a later version?

1 REPLY
Community Member

Enable HTTP metadatacache caching

Hey Dan,

After looking through the config guide, you should be able to configure HTTP metadata caching in WAAS 4.2.x+.

Review these config guide pages, which show where/how to configure HTTP (and HTTPS if applicable) metadata caching:

WAAS 4.2.x

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/policy.html#wpmkr1093630

WAAS 4.3.x

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/policy.html#wpmkr1093630

WAAS 4.4.x

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/policy.html#wpmkr1093630

Hope this helps!

-Chet

938
Views
0
Helpful
1
Replies
CreatePlease to create content