Interesting... The fact of the matter is that I had a device (OE-512) that raised an Alarm in WAAS CM for CIFS AO being down and I could not re-start it. I noticed that the License for Enterprise resmbled:
If you were using evaluation license at any time, it will expire but once you enable it with license add Enterprise CLI command, it remains there permanently. Do you know if you were using trial license by any chance. that is the only reason why it will show you expired.
In fact I do know that we were NOT using an Eval license on that device. My concern is that since I have a significant number of these devices in my care (100+), that I may be seeing an impending avalanche of issues. My "propeller-head" side wants to know why this could happen, and my Customer-Centric side wants to know how to be prepared!
This is the first time I have seen this kind of issue happenign with WAAS in my 3+ years of workign with WAAS. Yes, couple of times when people removed licensign manually, we did notice that but that was for license missing not for license expired. But otherwise, if has been working fine.
Can you send syslog.txt and cli_error.log file from WAE to me? OR You may want to open a TAC case and upload sysreport to analyze it in more details.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...