Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our beta test area to get started.

New Member

How to replace a WAE in a smooth way

Good morning all,

We have a WAE environment in several foreign countries.

In one of our companies i installed a WAE for testing the benefit of it there.

The responsible IT manager is satisfied of this solution and so he bought a WAE device.

Now i need to replace the "testing environment" with the new bought WAE.

Is there any replacement guide available, how to replace the WAE, especially if there are any deregistration/registration processes on the CM.

Please notice: i want to use the settings of the old WAE on the new one. (hostname / IP Address)

thanks

  • Wide Area Application Services (WAAS)
Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: How to replace a WAE in a smooth way

Dieter,

You can just follow the instructions for replacing a failed WAE found here:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/maint.html#wp1105458

Hope this helps,

Mike Korenbaum

Cisco WAAS PDI Help Desk

http://www.cisco.com/go/pdihelpdesk

3 REPLIES
Cisco Employee

Re: How to replace a WAE in a smooth way

editted: Mike added a more graceful way below

Dieter,

I don't believe a guide has ever been introduced to do this.

CM consideration - Degerister (cms dere force) the old WAE, intoduce new one (check if the old one is still in CM DB before, if it is scratch it manually).

Treat introducing new one as though the old one was never insterted.

WCCP considerations. There's no way the two can work together at the same time with same IP addresses - disable WCCP. Add it back in when you connect new WAE, replacing the old (clear arp cache on router/switche doing WCCP).

It's almost 1AM here so I might not be making too much sense :-)

Marcin

Re: How to replace a WAE in a smooth way

Dieter,

You can just follow the instructions for replacing a failed WAE found here:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/maint.html#wp1105458

Hope this helps,

Mike Korenbaum

Cisco WAAS PDI Help Desk

http://www.cisco.com/go/pdihelpdesk

New Member

Re: How to replace a WAE in a smooth way

Hi Michael,

thats it,

worked very well

thank you very much

Dieter

1560
Views
0
Helpful
3
Replies