Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Legacy Connection Clearing - WAE612

Hi,

Is there a way to program a 612 to automatically close down TFO connections that have been open for a specific length of time?

also

Is there any way of auto-clearing alarms?

John

3 REPLIES
Cisco Employee

Legacy Connection Clearing - WAE612

Hello John,

No, you could use a firewall or load balancer to close old connections.

And the alarms which can auto-clear do by themselves. The ones that do not auto clear when the problem goes away are too important to auto clear.

Which alarms did you have in mind?

Peter

New Member

Legacy Connection Clearing - WAE612

We have a TFO overload alarm on a 612, thinking about upgrading these soon anyway.  Just needed to know if they would auto clear and if we could auto clear old connections. 

We have a number of CIFS and LDAP connections running for over a month now.

Cisco Employee

Legacy Connection Clearing - WAE612

Hi,

overload alarms clear when automatically when the overload condition stops. So if you see the alarm the overload is currently happening.

CIFS and LDAP connections by design are pretty long lived but a month is indeed quite old...

You must have a very stable network!

Best regards, Peter

332
Views
0
Helpful
3
Replies