Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Legacy Print Services (4.2.x)

Hello,

We upgraded last night to the 4.2.x platform and one of the Wave274 boxes had an issue. Its producing a minor on the dashboard (yellow) related to Legacy print services. The error is shown below:

Minor:Legacy Print Services are deprecated in 4.2.x

Accompanying these are thousands of continious errors shown below (1 each):

Wed Jun 30 23:59:16 EDT 2010   WAE   AITEBOSTONWAAS   Server  warning  Error while adding or deleting print drivers.   Cannot process driver due to error preparing the FTP call

Wed Jun 30 23:57:16 EDT 2010   WAE   AITEBOSTONWAAS   Server  warning  Error while adding or deleting print drivers.   Edge NetBios name is not defined 
Wed Jun 30 23:56:37 EDT 2010   WAE   AITEBOSTONWAAS   Server  warning  Error in get list of installed print drivers.   NetBios name is not defined

-I've checked all of the Legacy Print Services sections and they reflect:

Print Services feature is not enabled on this Device

-Windows Print Accelerator is enabled by inherited Policy under acceleration.

How can I clear this error and make sure these logs do not indicate an issue?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Legacy Print Services (4.2.x)

Check the CLI configuration of the device for the command:

print-services enable

If it's there, disabling it with no print-services enable.

Regards,

Zach

1 REPLY
Cisco Employee

Re: Legacy Print Services (4.2.x)

Check the CLI configuration of the device for the command:

print-services enable

If it's there, disabling it with no print-services enable.

Regards,

Zach

384
Views
0
Helpful
1
Replies
CreatePlease to create content