cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
591
Views
0
Helpful
1
Replies

license error message

claudiols
Level 1
Level 1

we made a recent upgrade from 4.1.3 to 4.2.3, and now we have many messages in all waes that the transport license has not been purchased, but we are using the entrerprise license. any clue?

2010 Oct  7 17:15:03 NSTSWE0001 last message repeated 3 times
2010 Oct  7 17:24:18 NSTSWE0001 last message repeated 3 times
2010 Oct  7 17:30:29 NSTSWE0001 last message repeated 2 times
2010 Oct  7 17:33:29 NSTSWE0001 exec_license: %WAAS-CLI-5-170098: The License Tr
ansport has not been purchased.

NSTSWE0001#sh license
License Name   Status      Activation Date Activated By
-------------- ----------- --------------- --------------
Transport      not active
Enterprise     active      09/29/2009      admin
Video          not active
Virtual-Blade  not active

1 Accepted Solution

Accepted Solutions

smnambia
Cisco Employee
Cisco Employee


We do have a ddts filed for this issue CSCtc38874

The Release Note for this ddts is as follows

Symptom:
"License Transport not been purchased" notice syslog message is displayed
if Transport license has not been configured
WAE device might have Enterprise license configured instead.

Conditions:
Set the syslog priority as notice level
(config)#logging disk priority notice

Workaround:
Configures syslog priority level as warning.
(config)#logging disk priority warning


  The above ddts will be fixed in WAAS 4.3.1 Release

Regards

-Smita

Cisco PDI Helpesk

http://www.cisco.com/go/pdihelpdesk

View solution in original post

1 Reply 1

smnambia
Cisco Employee
Cisco Employee


We do have a ddts filed for this issue CSCtc38874

The Release Note for this ddts is as follows

Symptom:
"License Transport not been purchased" notice syslog message is displayed
if Transport license has not been configured
WAE device might have Enterprise license configured instead.

Conditions:
Set the syslog priority as notice level
(config)#logging disk priority notice

Workaround:
Configures syslog priority level as warning.
(config)#logging disk priority warning


  The above ddts will be fixed in WAAS 4.3.1 Release

Regards

-Smita

Cisco PDI Helpesk

http://www.cisco.com/go/pdihelpdesk