Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MIMIX port for Cisco WAE

We need to know about MIMIX port at IBM AS/400, we are now doing POC using Cisco WAE, here is the topology :

DC--> Cat6513 <------>Cat6513 <---DRC

| |

Cisco WAE Cisco WAE

our cisco WAE can not capture traffic from MIMIX IBM AS/400.

please we need advice for this case.

Regards

afdilah.syafar@multipolar.com

10 REPLIES
Cisco Employee

Re: MIMIX port for Cisco WAE

Afdllah,

Are you using Cisco WAAS? If so, can you please provide some additional information on how you are performing interception?

Thanks,

Zach

New Member

Re: MIMIX port for Cisco WAE

Yes, I used Cisco WAAS version 4.0.9,

i configure WCCP on both switch catalyst on interface vlan :

ip wccp 61

ip wccp 62

int vlan888

ip wccp 61 redirect out

ip wccp 62 redirect in

on interface to WAE ;

ip wccp redirect exclude in

regards

afdil

New Member

Re: MIMIX port for Cisco WAE

Zach,

Have you ever try WAAS to accelerate MIMIX traffic? Could you share your configuration?

Thanks,

Iwan

Cisco Employee

Re: MIMIX port for Cisco WAE

Iwan,

I have not personally used WAAS to accelerate MIMIX traffic.

Thanks,

Zach

New Member

Re: MIMIX port for Cisco WAE

Hi Zach,

But, do you have any documentation that mention WAAS able to accelerate MIMIX traffic or user guide about it? Because I cannot find it on cisco website and I am afraid that Cisco WAAS is unable to accelerate MIMIX.

Thanks,

Iwan

Cisco Employee

Re: MIMIX port for Cisco WAE

Ivan,

I checked internally, but was unable to find any references for WAAS optimizing MIMIX traffic. However, this doesn't mean that it isn't possible. Have you tried? Do you know the TCP ports being used?

Zach

New Member

Re: MIMIX port for Cisco WAE

Zach,

I have tried it with several scenario. First, using default WAAS policy. Second, create new policy using destination and source port from 1000-65000. Both scenario give no result. I have no idea the exact TCP port for MIMIX.

Iwan

New Member

Re: MIMIX port for Cisco WAE

zach,

when i'm doing POC to optimize MIMIX,

i use command :

#show tfo connection summary

and output of this command :

Local-IP:Port Remote-IP:Port Conn Type

10.204.230.2:50007 10.204.229.2:56028 PT In Progress

10.204.229.2:56028 10.254.20.11:50007 PT In Progress

ip add 10.204.230.2 is MIMIX server in DC

ip add 10.204.229.2 is MIMIX server in DRC

i already used that port to optimize MIMIX,

but still not optimize

Cisco Employee

Re: MIMIX port for Cisco WAE

AFDILAH,

You can use the debug command:

debug tfo conn auto

to determine why the connection is going into pass-through.

Zach

New Member

Re: MIMIX port for Cisco WAE

Thank Zach, we will try it. But unfortunately, we cannot do it soon. We need time to setup the lab.

Thanks.

985
Views
0
Helpful
10
Replies
CreatePlease login to create content