Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

nme-wea-502 configure

HI Zack,

Under is the configuration about NME-WEA-502

APP#cms deregister  force
Management service is not enabled/registered.

Based on the input, the following configuratio
       central-manager address
       ip name-server
       ip domain-name  c.c
       primary-interface GigabitEthernet 1/0
       hostname APP
       clock timezone UTC 0 0
       cms enable
       wccp version 2
       wccp router-list 8
       wccp tcp-promiscuous router-list 8


PING ( 56(84) bytes of data.

64 bytes from icmp_seq=1 ttl=61 time=0.943 ms

64 bytes from icmp_seq=2 ttl=61 time=0.620 ms

64 bytes from icmp_seq=3 ttl=61 time=0.669 ms

64 bytes from icmp_seq=4 ttl=61 time=0.759 ms

64 bytes from icmp_seq=5 ttl=61 time=0.811 ms

--- ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3998ms
rtt min/avg/max/mdev = 0.620/0.760/0.943/0.115 ms
APP#conf t
APP(config)#cms enable
Registering WAAS Application Engine...
Sending  device registration request to Central Manager with address
Failed to contact CDM Please check connectivity with CDM
device and status of management service on CDM.
register: Registration failed(512).
cms: unable to register node i

FAILED to enable management services

I had  registed to the CM before ,when NME-WEA-502 offline ,and I try to  regist to the

CM again, show this error,could you mind to tell me how to fix it ?

Everyone's tags (2)
Cisco Employee

Re: nme-wea-502 configure

Let's check a couple of things:

  1. If you look at the list of devices in the CM, do you see the NME-WAE there?  If so, delete the record of that device on the CM.
  2. What is the output of sh cms info on the CM?



CreatePlease login to create content